Infinity Bliss Manual Fireplace LIghting Instructions

Infinity Bliss Manual Fireplace Lighting Instructions 

Peterson Real Fyre G19A-24/30-O1VP

1. 1. Locate the control panel/knob: The control valve is typically located at the front right side of the burner assembly in the fireplace.
   2. Ensure gas is on: Verify that all external and internal gas supply valves are in the "on" position (parallel with the gas line).
   3. Turn the knob to the "PILOT" position: Push the main control knob in slightly and rotate it until it points to the "PILOT" setting.
   4. Light the pilot:
      • While continuing to push and hold the knob in, press the igniter button (often red or black) repeatedly to create a spark and light the pilot flame.
      • If there is no igniter button, you will need to use a long match or a lighter to light the pilot manually near the pilot opening while holding the knob in.

• Hold the knob: Once the pilot is lit, continue to hold the knob in for approximately 30-60 seconds. This allows the thermocouple to heat up and keep the pilot lit when you release the knob.

• Release the knob: Slowly release the control knob. The pilot flame should remain lit.
  • If it goes out, repeat the process, holding the knob for a slightly longer period.

Click here to Google Search For additional Instructions